INDUSTRIAL
LUBRICANTS

Hydraulic Oils: Hydraulic oils are extensively used in various hydraulic systems & mechanisms of CNC and special purpose hydraulic equipment. Different positive displacement pumps are employed in developing the required pressures. The moving parts of these pumps tend to wear out and reduce the desired performance levels unless the right type of hydraulic oil is used. Our hydraulic oils help you reduce wear and extend drain periods.

Available Viscosities @ 40 Degrees Celsius in Cst: 32/46/68/100/150/220/320/460/680

Various Grades of Hydraulic oils like AW type, HLP Type, HVI type & Super Clean oils are available meeting numerous performance specifications like:

1. Cincinnati Milacron P68,P69 & P70
2. DIN 51524 PART II & III
3. ISO -1158 (HM Fluid)
4. Eaton Vickers 69H
5. Arburg & Denison HF0,HF1 & HF2

Lubrication Oils:  All Machine tools like grinders, planners & shapers have slideways and guides which perform optimally only when lubricated with the right lubricant. This also helps to reduce the possibility of stick-slip motions. Our Lubrication oils help you get the most optimum performance.

Available Viscosities @ 40 Degrees Celsius in Cst: 32/68/100/150/220/320

Performance Levels Available: ISO-19378

General Machinery Oils:  Most machinery need lubrication with a suitable lubricant with properties like lubricity, good lubricant film, ability to reduce heat, basic rust protection and have an economical cost. We can help you with the right machinery oil with all the above properties.

Available Viscosities @ 40 Degrees Celsius in Cst: 10/32/46/68/100/150/220/320/460

Performance Levels Available: 

1. IS 493 PTI/93 
2. ISO – 19378

Pneumatic Tool Oils: Many construction companies, mines & quarries use equipment’s which use high pressure compressed air to drive their pneumatic equipment. Such pneumatic equipment require proper lubricants as only compressed air does not possess lubricity and such lubricants are critical for their smooth operations. We can help you with the most suitable rock drill lubricants for your equipment.

Available Viscosities @ 40 Degrees Celsius in Cst: 68/100/220

Turbine Oils: Turbines oils are critical lubricants in power plants and other equipment’s. We can provide premium quality turbine oils manufactured from the most superior base oils which have high oxidation and chemical stability.

Available Viscosities @ 40 Degrees Celsius in Cst: 32/46/68/

Performance Levels Available: 

1. IS-1012-1987 (Reaffirmed to 1993)
2. BS :489-1983
3. SIEMENS TLV 901304

Industrial Gear Oils: Gears and gear boxes are an integral part of any industry. We can provide premium quality extreme pressure industrial gear oils in different viscosities depending on the need of the gear box.

Available Viscosities @ 40 Degrees Celsius in Cst: 68/100/150/220/320/460/680/1000 

Performance Levels Available: 

1. IS 8406/93 specifications. 
2. AGMA STANDARD 250.04 
3. CINCINNATI MACHINE – P-63, P-76, P-77, P-74, P-59

Thermic Fluid ( Heat Transfer Oils): We have with us available synthetic & mineral oil based heat transfer fluids. synthetic type thermic fluid are manufactured from synthetic base oils with specially selected additives for superior performance. Mineral oils can also  be used in heat transfer systems operating at temperatures up to 270°C. 

Available Viscosities @ 40 Degrees Celsius in Cst: 30/35

Refrigeration Oils: we are able to provide premium Refrigeration oils, they need to be manufactured from specially selected base oil to provide low pour point,  good chemical stability, dryness and ready solubility in liquefied refrigerant. The product should have high fluidity at very lower temperatures, lower deposit formation and have low foaming tendency.

Available Viscosities @ 40 Degrees Celsius in Cst: 32/68

Loom Oils: we can provide loom oils which have been specifically designed for oil loss systems of textile looms. These lubricants tend to have an adequate film forming property for better lubrication.

Available Viscosities @ 40 Degrees Celsius in Cst: 220/320/460/700

Sugar Mill Bearing Lubricants: Cane Mills are the most important equipment in a sugar factory. We can provide premium lubricants for sugar mill crusher and roll bearing and also for their gear drives. These lubrication requirement present a continuous challenge the to plant personnel.

Available Viscosities @ 100 Degrees Celsius in Cst: 35/45/65/85/125

Open Gear Compounds: Open gears tend to have a requirement to transmit heavy loads at slow speeds, Gears tend to have large sizes. These gears are not usually enclosed, thus we can provide lubricants that adhere to the gear and not flow out.

Available Viscosities @ 100 Degrees Celsius in Cst: 225/425/1100

Cylinder Oils: Steam engines are essential in some factories that have continuous operations where the use of saturated or super heated steam is eminent. We can help you get the right cylinder oils to optimise performance.

Available Viscosities @ 40 Degrees Celsius in Cst: 460/680/1000

Compressor Oils: Compressors are the most common equipment in any industry. Compressors can be of reciprocating air type or vertical or horizontal cylinder type. We can provide superior quality compressor lubricants for all your requirements.

Available Viscosities for air compressors @ 40 Degrees Celsius in Cst: 68/100/220/320/460/680/1000 

Performance Levels Available for air compressors: 

1. DIN 51506 VD-L

Available Viscosities for Screw Compressors @ 40 Degrees Celsius in Cst: 68

Performance Levels Available for Screw compressors: 

1. DIN 51524 PART-II 
2. DIN 51506 VD-L

Other Industrial Lubricants:

Lubrication is an exhaustive subject and the list of applications and products are innumerable, apart from the above products below is a list of some of the other lubricants available with us. We can also help you develop tailor made products as per your specific needs and applications. You can get in touch with us to know more.

1. Quenching Oils
2. Conning oils
3. Spark Erosion oils
4. SS Tube Drawing Oils
5. Wire Drawing Oils
6. Cleaning Fluids
7. De Moulding Oils